Hangar Spares and Tooling Audit: A Friendly Checklist

Hangar Spares and Tooling Audit: A Friendly Checklist

Walk into almost any small maintenance hangar and you will find it: a back room or a row of shelves crowded with parts and tools that nobody has touched in a year. A spare starter that was bought “just in case.” A torque wrench set for an engine type the shop no longer services. Three boxes of fasteners in a size used once. Running a hangar spares and tooling audit is one of the least glamorous jobs in aviation maintenance, but it is also one of the quickest ways to free up cash and space. This checklist walks you through it in plain terms, with one guiding idea: own what you use constantly, and arrange access to everything else.

Why bother? Because every part sitting idle on a shelf is money that is not working. It may also be ageing out of its shelf life, missing paperwork, or quietly becoming obsolete as your customer base changes. Meanwhile, exchange programmes, loaner pools and rental tooling have made it easier than ever to get what you need, when you need it, without keeping it forever.

Before you start the spares audit

  • Pick a quiet week and block a few hours each day. Rushing this is how mistakes happen.
  • Pull at least twelve months of work orders so you can see what was actually used.
  • Get a second person involved, ideally one inspector and one person who handles purchasing.
  • Prepare four labels or tags: Keep, Exchange, Sell or Lend, and Scrap.

Checklist part one: consumables and fast movers

  1. Match every bin to usage. Fasteners, filters, gaskets and seals that moved several times in the past year belong on the Keep list. Our guide on setting sensible stock levels for replacement parts covers how to pick reorder points.
  2. Check shelf-life dates. Sealants, O-rings and certain hoses have limits. Anything expired goes to Scrap, no debate.
  3. Look for duplicates. Two half-empty boxes of the same part number? Consolidate them and note the true quantity.
  4. Confirm paperwork. A part without traceable documentation is a liability, not an asset. Quarantine it until the trail is sorted or dispose of it properly.

Checklist part two: rotables and expensive components

This is where the big money hides. Starters, alternators, magnetos, vacuum pumps and avionics units can cost a great deal, and many shops hold one “for emergencies” that rarely gets installed.

  1. List every rotable you hold with its part number, condition and the last date it was used.
  2. Ask whether an exchange would serve you. Many suppliers ship a serviceable unit quickly and take your core back. If the turnaround fits your customers’ expectations, holding your own spare may not be worth the capital.
  3. Weigh downtime honestly. If a particular aircraft on your books flies commercially and cannot wait, keeping one unit may still make sense. Waiting on parts often costs more than the part, a point made in this piece on how prompt replacement keeps repair bills down.
  4. Tag anything unused for two years as a candidate for Sell or Lend unless there is a clear reason to keep it.

Checklist part three: special tooling

Special tools are the classic idle asset. A rigging fixture or engine-specific puller might be essential for a once-a-year task and useless the rest of the time.

  1. Separate daily tools from occasional ones. Hand tools, inspection mirrors and general torque wrenches stay. Single-task fixtures get scrutinised.
  2. Check calibration status. A calibrated tool that drifts out of date while unused costs you a recalibration fee before its next job anyway.
  3. Find rental or loan options. Several suppliers and larger shops rent specialised tooling for a job. Local maintenance networks sometimes share tools informally, too.
  4. Consider lending your own. If you own a fixture that a neighbouring shop needs twice a year, lending or renting it out turns dead stock into a small income stream and builds goodwill.

Checklist part four: ground support equipment

  1. Count the big items. Engine hoists, tow bars for types you no longer see, nitrogen carts and jacks take up floor space even when they cost little to keep.
  2. Note how often each one left its corner over the past year. A hoist used twice may be easier to hire from a neighbouring operator or an equipment supplier.
  3. Offer what you rarely use. A tow bar gathering dust in your hangar could be exactly what a visiting pilot needs on a Sunday morning.

Checklist part five: buying habits that created the clutter

An audit only helps if you change the habits behind it. Look at how the idle items arrived.

  • Were parts ordered in bulk to hit a discount, then never used?
  • Were components bought for one aircraft that later left your customer list?
  • Did someone order a “better” part that turned out to be incompatible? The pitfalls listed in our rundown of common control system purchasing errors are a good reminder of how this happens.

Write down two or three rules for future purchasing. For example: no speculative rotables without sign-off, and every special tool purchase must be compared against a rental option first.

A quick word on vehicles and other shop assets

The same thinking applies beyond the shelves. Plenty of small shops own a van or a scooter for parts runs and outstation jobs that sits in the car park most days. If yours only moves now and then, renting for the trips you actually make may be simpler. In India, for instance, MotoShare lists scooters, bikes and cars from local owners that can be booked for the days you need them, and owners with an idle vehicle can list it to earn from the quiet days instead.

After the audit: keep it from creeping back

  1. Set a calendar reminder to repeat a lighter version every six months.
  2. Keep a simple log of every exchange or rental you use, so you can tell whether access is working or whether certain items genuinely deserve a shelf.
  3. Review the Sell or Lend pile monthly until it is gone. Parts left in limbo become clutter again surprisingly fast.
  4. Share the results with the whole team. When technicians see how much capital was freed, they become more careful about what gets ordered.

The payoff

Shops that finish this audit usually notice three things. The stores area becomes easier to navigate, which speeds up every job. Cash that was sitting in rarely used components becomes available for training, tooling that earns its keep, or simply a healthier balance sheet. And the team starts thinking in terms of utilisation: if something is not going to be used often, there is probably a smarter way to get it when it is needed.

None of this means owning nothing. A well-run hangar still needs a solid core of parts and tools close at hand. The goal is simply to make sure that everything on your shelves has earned its place, and that everything else is a phone call or an exchange order away.